KA&MELOCK KM 17

KA&MELOCK KM 17

KA&MELOCK KM 17 is an elastomer bonding agent designed for use as a topcoat.
When applied in combination with the KA&MELOCK MP 05 primer, it is particularly suitable for applications requiring high resistance to elevated temperatures, corrosion, and dynamic loads during the vulcanization process of elastomers bonded to metal and plastic substrates.
In certain applications, KA&MELOCK KM 17 can also be used as a single-coat bonding agent.

Coating with KA&MELOCK KM 17 provides good resistance to corrosion, oils, and solvents. However, corrosion and heat resistance are significantly enhanced when the system is applied in combination with the KA&MELOCK MP 05 primer.

KA&MELOCK KM 17 enables reliable bonding of elastomer compounds based on natural rubber (NR), polyisoprene (IR), polybutadiene (BR), styrene-butadiene rubber (SBR), nitrile rubber (NBR), chloroprene rubber (CR), butyl rubber (IIR), and ethylene propylene rubber (EPDM) to a wide range of metal and plastic substrates during the vulcanization process.

The combination of KA&MELOCK MP 05 and KA&MELOCK KM 17 is particularly well suited for soft NBR and NR blends, especially in the production of transfer molding (TM) and injection molding (IM) components.

DOWNLOAD PDF

Technical Data

Colour                                                                                   Brown Liquid

 

Viscosity   4 mm DIN-Cup                                        80 – 120 s

 

Viscosity,cps@25°C(77°F)

                                                                                                  200 – 600 mPas

Brookfield SNB1
Spindle 2, 30 rpm

 

Specific Gravity                                                               0,96 – 1,04 g/cm³

 

Solid Content                                                                    22 – 26 % by weight

 

Solvents                                                                                Xylene

 

*Data is typical and not to be used for specification purposes.

At GOTEC Bonding Agents, precise testing and thorough analysis form the basis of reliable product performance.
All KA&MELOCK bonding agents are tested, documented, and validated in our laboratories. In parallel, continuous research and development activities support ongoing product optimization in our dedicated demo and application facilities.

To identify the most suitable KA&MELOCK bonding agent for your application, our technical team is available to assist you.
By providing information on your elastomer compound, substrate, and application method, we can recommend the appropriate KA&MELOCK bonding agent system tailored to your requirements.

Increase the value of your products with KA&MELOCK quality.
Our technical support teams are available to support you throughout your development and production processes.